How much does it cost to have someone paint your deck?

Prices for deck painting and staining run about $2-$5 per square foot, depending on the size and condition of your deck. The type of paint or stain you choose will also affect the overall cost. Most projects average between $300-$1,200.

How much does it cost to stain a 12x12 deck?

A 12x12 deck costs $226 to $582 to stain when paying someone, or $59 to $176 to stain it yourself. A gallon of stain costs $20 to $50, which covers 200 to 300 square feet. Get free estimates from deck staining companies near you or view our deck stain cost calculator below.

How much should I charge to sand and paint a deck?

Deck painting costs $600 to $2,000 on average. The cost to paint a deck, patio, porch, or pool deck is $2 to $5 per square foot, depending on the condition, size, design, paint quality, and labor. Repainting a deck costs $3 to $9 per square foot for cleaning, repairs, and prep work.

How much does it cost to pay someone to stain your deck?

Average Cost to Stain a Deck

The cost to stain your deck typically ranges from $540 to $1,050 with an average of just over $700. This equates to an average cost of $2 to $4 per square foot for labor and materials. Higher-quality stains will run up the price, as will washing or sealing the wood prior to staining.

How much does it cost to paint and stain a deck?

Here's a more specific look at deck staining or painting costs: Small decks 150 to 250 square feet are roughly $3,000. Medium decks 300 to 600 square feet are about $4,000 to $6,000. Large 600 to 1,000 square feet are around $6,000 to $10,000.

How To: Deck Stain Price

Is it cheaper to paint or stain a deck?

Stain is more budget-friendly.

Stain runs between $20 and $35 per gallon, while exterior paint suitable for decking ranges from $30 to as much as $60 per gallon. Plus, if painting, you'll have to factor in an extra $15 to $40 per gallon of wood preservative and $15 to $30 per gallon of primer.

How much to pressure wash and paint a deck?

$415 – $925. The average cost to power wash and stain a deck is $2.15 to $4.25 per square foot. Deck painting cost is slightly lower. Total cost is $415 to $925 for decks of average size when a contractor is hired to do the work.

How much does it cost to stain a 10 x10 deck?

A 10'x10' deck covers 100 square feet, with a typical staining cost of $300. A 12'x12' deck covers 144 square feet, costing an average of $432. 8'x10' works out at 80 square feet, with a final cost of $240. A deck measuring 10'x20' covers 200 square feet for a typical cost of $600.

How much does it cost to stain a deck per hour?

Labor. Deck staining contractors charge around $40 to $70 per hour, so labor costs vary by how long the job takes. A deck that measures 250 square feet requires about 10 hours of labor but this metric increases with more intensive work.

How much does it cost to paint a deck per square foot?

Prices for deck painting and staining run about $2-$5 per square foot, depending on the size and condition of your deck. The type of paint or stain you choose will also affect the overall cost. Most projects average between $300-$1,200.

How much does a gallon of deck paint cover?

You need one gallon of paint for every 300 to 400 square feet. If bare wood is being covered, it will soak up more paint and you'll get closer to 300 square feet of coverage per gallon. If you're covering a previously painted deck, you will get closer to 400 feet per gallon.

How long does deck paint last?

When you opt to paint your deck, you won't have to refinish it anytime soon. A quality paint job, finished by a trusted professional, can last for ten years before needing repainting. Conversely, stains need reapplied every few years because they don't offer the same protection against outdoor elements.

Should I pressure wash my deck before painting?

If you decide not to power wash beforehand, not only will your new paint not stay for very long, but your old paint will still be underneath. Pressure washing will not only remove the dirt and grime, but it can also remove old, chipped paint that may cause discrepancies in you new paint job.

What happens if I don't stain my deck?

The effects that can occur due to a lack of treatment are aesthetic in nature. After 6 months, the wood will start to lose its color and will begin to fade. Ultimately it will fade to grey or silver. This is not a problem in and of itself, and some people prefer this look for their decks.

How much stain do I need for a 20x20 deck?

To stain a 20x20 ft² deck area, you'll need approximately 2 and 1 quarter gallons (2.25 gal). You can get this result by assuming that 1 gallon can cover up to 175 ft². Also, consider this amount is for one coat of stain.

How many coats of stain should you put on a deck?

We always recommend two coats of stain for any wood project, but you should only apply as much stain as the wood can absorb. Extremely dense hardwoods may only be able to absorb one coat of wood stain. The general rule of thumb is to apply only as much as the wood can absorb.

How much should I sand my deck before staining?

Many homeowners recognize this but wonder how to sand a deck for the best results. To open the wood grain so it absorbs stain or paint, sand the deck using 20 to 50 grit sandpaper on the first pass and 60 to 80 grit on the second pass on a belt sander or orbital floor sander.

How often do you need to stain a deck?

Typically, homeowners should restain horizontal surfaces such as decks every two to three years. Poor deck upkeep will decrease the time you have to enjoy the deck before restaining it, while good deck upkeep may give you another year or two before you need to restain the deck.

How much does it cost to power wash a 12x12 deck?

The national average materials cost to power wash deck is $0.10 per square foot, with a range between $0.09 to $0.11. The total price for labor and materials per square foot is $0.51, coming in between $0.46 to $0.57. A typical 300 square foot project costs $153.60, with a range of $137.37 to $169.82.

Is it OK to pressure wash a wood deck?

For cleaning a wooden deck, you'll be best served by using the lowest pressure setting that's still effective. For soft woods like cedar or pine, this is usually about 500 to 600 psi. For harder woods, it can go up to 1200 to 1500 psi.

Should a deck be power washed before staining?

There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.

How much does labor cost to pressure wash a deck?

The national average in terms of material cost for a deck cleaning is about 10 cents per square foot. The labor cost is an average of about 51 cents per square foot. Therefore, an average 300 square foot deck would cost, on average, $153 to have pressure washed.

How long after power washing can you stain a deck?

The short answer is 48 hours. You should wait at least two days after pressure washing your deck before you consider staining it, to give time for it to dry. Now let's talk about specifics. Cleaning your deck is an all important first step in the staining process.

Can you jet wash decking?

If you have timber deck boards, a power washer's pressure may cause splintering and damage to the timber fibers. If the timber surface already has some splintering, pressure washing will only exacerbate the issue. You may have already heard about the problems of pressure washing a timber deck.